EASY AND WORKING WAYS TO CHANGE ANY ANDROID PHONE IMEI NUMBER

Changing the IMEI of your MTK /
Android is now possible, this includes for MTK
6577 / 6575 android devices, e.g:- Tecno,
Gionee, Infinix, and few others, and this post will
show you how to do it using Mobile Uncle Tools.
NOTE:
1. This tweak was initiated for the main purpose
of educating our readers, we will Not be held
responsible if this info is used for any illegal
activity.
2. We reserve the right that if you get your device
bricked during the process stated below, We
won't be held responsible for any Damages.
Meanwhile this post should be useful if your
MTK phone is having problem registering your
SIM to your network. Probably due to change of
location.
That's by the way, but we assure damaging your
device during procedure is nothing to worry
about, you'll get it successfully done within
seconds if you follow the Steps below carefully:
1. A Rooted Android (MTK 6577 / 6575)
2. A valid IMEI number
3. The MobileUncle MTK Tools from PlayStore
N.B
Note that when you use IMEI number of your old
unused mobile phone, be sure to never insert a
SIM of same network again.
i.e >> If you use a Glo sim on a Blackberry (or
any other phone), after you copied and use the
Blackerry's IMEI into your Android, your Glo will
work fine on your Android. But be sure not to
insert that same Glo SIM into the Blackberry
again, If you do and switch it on, the sim will not
register to the network.
After getting the above ready, follow the
Procedures below:
1. Dial *#06#, write down your Default IMEI, or
Simply Back it up on ur SDcard >> See this Post
on How to Backup IMEI on Android.
2. Run the MobileUncle tools App
3. Go to >> Engineer Mode >> Engineer Mode
(MTK)
4. Scroll down to CDS Information
5. CLICK >> Radio Information
You'll see something like:
Phone1 -
Phone2 -
In that select Phone2, because in most of these
Chinese cloned phone, the 1st Sim which is a 3G
will work perfectly. Problem only happens when
we insert the second sim. Such cases are
experienced if after you check, you can see the
IMEI of 1st sim starting with 35xxxxx and the
2nd will start with 88xxxxxxxx. That is why the
second sim is not able to register to the
network, because its not in international
formatted IMEI. So usually we need to change
the IMEI of Phone 2.
When you select any of Phone1 or Phone2 -
you'll find AT+ __________
Inside there input your new IMEI number,
click >> SEND AT COMMAND
That's all!
Some devices are different and may want to
prove stubborn, so here's an extra tip just in
case the steps above didn't work for you.
TO CHANGE IMEI FOR SIM1 OR
DEVICES WITH ONE-SIM ONLY:
Type the following command then Press Enter or
click SEND AT COMMAND
echo ‘AT+EGMR=1,7, “IMEI_NUMBER” ‘
>/dev/
pttycmd1
TO CHANGE IMEI FOR SIM2 (DUAL
SIM):
If your phone is dual-sim, type this
command: echo ‘AT+EGMR=1,10,
“IMEI_NUMBER” ‘ >/dev/pttycmd1
Press ENTER or SEND AT COMMAND
if you get errors saying "Sending Failed" or
"module not supported for device errors"
When you get the AT+EGMR
Make sure you leave a Space between ‘AT
+EGMR= (and) the IMEI Number
For example > ‘AT+EGMR=
[space]"2345XXXXX"
Now Click SEND AT command, You'll get
response "AT command is mSent"
Now restart your Infinix Hot. That's all.
Yes we are done… now you can restart the phone
and check the IMEI. See if it worked by dialing
*#06#
EXTRA TIP: FOR THOSE USING GLO NG
You can get 3gb and use it to browse after you
change it to IMEI of Blackberry phone.
Activate a Glo BIS Plan.
Comonth to 777 (3GB) for
1,000Naira
Coweek to 777 (700Mb) for
400Naira
Set APN - blackberry.net